Get the SuperCage with two Universal Mobile Gripss
Your USB-C phone connects to the hub with a custom high-transfer ribbon cable that enables both power and data transfer.
A dedicated USB-C PD port with 100W pass-through power to charge your phone and power your accessories. It can also be a data input if needed.
Connect an SSD through our USB-C 3.2 port that provides 10 Gb/s transfer speeds OR use the integrated SD 4.0 card slot with up to 250Mb/s write speeds (V90 card recommended).
Use the full-size 4K 60Hz HDMI port for video monitoring.
Includes a 3.5mm input and output to connect lav mics and headphones.
It has extra USB-C 3.2 ports for you to attach additional gear.
Works with USB-C or 3.5mm output.
Works with any 1/4”-20 bolt with a spacing of 9mm. Works with 3/8”-16 with Arri anti-twist pin holes.
Works with all adjustable NATO clamps (that can be loosened) Side rails have clearance for fixed NATO clamps of 21mm width. Top rail has clearance for fixed clamp width of 26mm.
We suggest using cables rated for USB-C 3.2 ports with at least 10Gb/s transfer speeds
Low profile cable ends under 18mm x 18mm x 7mm will fit. Television & Hifi cables likely will not fit.
Drives with at least 220 MB/s write. We recommend finding a drive with a rugged enclosure.
We suggest a USB-C first battery with at least 5000mah / 22.5W. The hub can accept any amount of input power.
Bottom rail is compatible with fixed or adjustable Arca clamp profiles. Please check that your clamp does not have a fixed locking pin, as this may not be compatible.
Boasting one continuous open rail profile with NATO compatibility on the sides, top with Arca on the base. Including dozens of additional mounting points: (4) x 3/8”-16 thread, (4) x cold-shoe mounts, and (39) x 1/4”-20 threads.
